Silicon-mediated genotoxic alterations in Brassica juncea under arsenic stress: A comparative study of biochemical and molecular markers

Arsenic (As), one of the most harmful toxicant at the global level, severely affects plant metabolism when taken up. Interestingly, the presence of silicon (Si) as a fertilizer in As-contaminated soil is an effective strategy to decrease As accumulation in plants. Brassica juncea (var. Varuna) were grown hydroponically to investigate the role of Si at biochemical and molecular levels under arsenite (As³⁺) stress. Seedlings of B. juncea were exposed to As³⁺, Si, and a combination of both elements. Our data demonstrated that seedlings exposed to As³⁺ showed an inhibition in shoot length, chlorophyll, carotenoid, and protein, while co-application of Si improved these growth parameters. Silicon supplementation reduced As accumulation in shoot. Increase/decrease was observed in stress-related parameters (cysteine and proline), antioxidant enzymes (superoxide dismutase, ascorbate peroxidase, and catalase), and oxidative stress markers (malondialdehyde and H₂O₂), which were improved upon co-application of Si as compared to As³⁺ alone treatment. Random amplified polymorphic DNA (RAPD) is a suitable biomarker assay for plants for assessing the genotoxicity. Seven RAPD primers produced a total of 39 and 48 bands in the leaves of the untreated and treated seedlings, respectively. The RAPD band-profiles and genomic template stability were consistent with other growth and physiological parameters. In conclusion, the genotoxic alterations along with the biochemical parameters indicate that the exposure to Si mitigates As³⁺-induced oxidative stress by improving the stress-related parameters and antioxidant system in B. juncea.     

白果壳遗态HAP/C复合材料对水中氨氮的吸附

为综合利用农林废弃物，以白果壳为植物模板、羟基磷灰石（HAP）为改性材料，制备了白果壳遗态HAP/C复合材料（PBGC-HAP/C-G），并通过X射线衍射仪（XRD）、傅里叶红外光谱仪（FT-IR）和扫描电镜（SEM）等对其进行了表征，同时研究了溶液pH、初始浓度、吸附剂投加量等对其去除水中氨氮的影响。结果表明，PBGC-HAP/C-G是一种大孔材料，孔径主要介于35~200 μm之间。在溶液pH=5时，吸附效果最佳；吸附剂投加量的增加有利于氨氮的去除；粒径大小不是影响吸附效果的主要因素。准二级动力学模型和Freundlich等温吸附模型能很好地描述该吸附过程，吸附过程以化学吸附为主。在氨氮初始浓度为20、50、100 mg·L^-1时，拟合计算得到的理论平衡吸附量分别为0.45、1.10、2.15 mg·g^-1，与实验测定值0.46、1.15、2.18 mg·g^-1相近，可见PBGC-HAP/C-G可用作去除氨氮的吸附剂。     

绵羊Izumo1基因多态性及其与产羔数关联分析

为研究Izumo1基因多态性及与产羔数关系,本研究利用PCR和直接测序法对小尾寒羊和苏尼特羊的Izumo1基因DNA序列进行扩增、测序和BLAST分析,并和本课题组前期绵羊重测序数据进行比对,筛选出Izumo1基因SNP位点。同时,采用Sequenom MassARRAY~?技术进行基因分型,并对其SNP位点的基因型和等位基因频率在各群体中的分布进行研究。结果表明:小尾寒羊Izumo1基因DNA全长序列3 385 bp,苏尼特羊Izumo1基因DNA全长序列3 382 bp;筛选出8个Izumo1基因SNP位点,经过初步筛选,将在小尾寒羊、苏尼特羊、滩羊、萨福克羊、杜泊羊、草原藏羊这6个绵羊品种中位点分布没有差异的SNP位点排除,最终筛选获得的g.54412135AG和g.54412107CA 2个位点。Izumo1基因g.54412135AG位点在多羔和单羔绵羊品种中存在GG、GA和AA 3种基因型,G基因为优势等位基因;g.54412107CA在多羔品种中存在CC和CA 2种基因型,而在单羔品种中存在CC、CA和AA 3种基因型,C基因为优势等位基因,其基因型频率和基因频率在单、多羔绵羊群体间的分布差异均极显著(P0.01);群体遗传学分析得出g.54412135AG多态位点在6个品种中的多态信息含量(PIC)都属于低度多态(PIC0.25);g.54412107CA多态位点在杜泊羊中属于中度多态(0.25PIC0.5),在其他5个品种中都属于低度多态(PIC0.25),然而,关联分析发现Izumo1基因g.54412135AG和g.54412107CA位点的不同基因型与小尾寒羊不同胎次产羔数之间不存在显著关联(P0.05)。     

基于RGB颜色空间的早稻氮素营养监测研究

针对双季稻区水稻过量施肥带来环境污染和成本提高问题,设计不同品种氮肥梯度大田试验,应用数码相机获取早稻冠层数字图像,研究不同色彩参数及早稻氮素营养指标的时空变化特征,以期确立双季早稻氮素营养预测模型。结果表明:不同品种同一氮肥处理下图像色彩参数差异不大;拔节期数字图像参数对氮素营养指标敏感;模型构建结果显示,图像参数INT与水稻氮素营养指标构建的模型决定系数(R2)最大,模型预测效果最佳,R2分别为0.895 7和0.924 7;进一步采用多元回归分析和BP神经网络分析法进行预测,预测效果均较好。对预测结果进行检验,发现品种对于模型的构建影响不大,以BP神经网络分析法构建的叶片氮浓度(LNC)模型和以INT为敏感色彩参数构建的叶片氮积累量(LNA)回归模型效果最优,而多元回归分析方法则效果不佳。早稻冠层RGB颜色空间敏感参数与氮素营养指标间相关性较好,可以实现氮素营养的无损监测诊断。     

Evaluation of limb autotomy as a promising strategy to improve production performances of mud crab (Scylla olivacea) in the soft‐shell farming system

Soft‐shell crab, a newly moulted crab having non‐calcified and hydrated soft exoskeleton, farming has been increasing tremendously in recent years throughout the world due to its high market price and consumer preferences. However, high aggressiveness and cannibalistic behaviour of mud crab limit its culture to an individual chamber system which ultimately makes the soft‐shell mud crab farming space and labour‐intensive. Therefore, the aim of this study was to improve the efficiency of soft‐shell crab production by autotomy of the claw and/or walking legs to reduce the moulting duration and intensify the culture system through double stocking in the existing individual chamber culture system. To achieve our objectives, a series of experiment were conducted at both indoor and on‐farm levels by removing the claw and/or walking legs of Scylla olivacea for two consecutive moulting cycles. Results showed that both claw ablation significantly (p < .01) shortened the moulting duration and increased the carapace width, weight gain, specific growth rate, feeding efficiency and yield parameter compared to the non‐ablated crabs more prominently at 1st moulting than the 2nd moulting in both indoor and on‐farm trials. Ablation of all walking legs while keeping the claw intact did not significantly influence (p > .05) the moulting duration and carapace width, but significantly (p < .01) improved the specific growth rate, weight gain, feeding efficiency and yield parameters at 1st moulting compared to the non‐ablation and unilateral three walking leg ablation groups. However, ablation of all appendages (both claw and walking legs) showed significant (p < .01) improvements of carapace width, weight gain, specific growth rate, feeding efficiency and yield parameters, and shortened the moulting duration up to 23 days from 34 days during 1st moulting and up to 27 days from 40 days at 2nd moulting. The survivals of different autotomized mud crabs were statistically non‐significant (p > .05) to the non‐autotomized crabs in various indoor and on‐farm trials. Besides improving the production performances, ablation of bilateral claw and all appendages allowed to double the stocking density in the existing individual chamber‐based soft‐shell crab farming that enhanced the production about threefold higher than the existing individual chamber‐based culture system. Finally, our results suggest that autotomy could be a promising technology for the commercial farming of soft‐shell mud crab in near future.     

矾根主要品种的叶色表型性状分析

通过目测进行分类的方式很难准确界定矾根品种叶色。为建立一套更为科学的基于叶色表型的矾根品种分类体系,笔者利用色差仪对72个矾根品种共计432个样品的叶色进行测定,对获得的L、a、b 3个色度值进行聚类分析,将72个矾根品种分为褐色系、深绿色系、黄色系、灰绿色系、浅绿色系5类色系。对矾根品种各色系的L、a、b值进行相关性分析,发现叶片正面的L值与a值、a值与b值呈负相关,L值与b值呈正相关,但相关性不明显;叶片背面的L值与a值、a值与b值呈负相关,L值与b值呈显著正相关。从多重比较的结果中可以看出,矾根品种各色系之间的L、a、b色度值差异显著,尤其是各色系间叶正面的颜色差异较大,在矾根品种选育工作中,叶片正面的颜色将作为主要参考。     

鱼类组蛋白核苷酸的多态性及其在杀鱼爱德华氏菌感染中的作用

组蛋白是染色体核小体的重要组分,在调控染色质结构、基因转录、个体发育等不同生物学过程中起着重要作用。为了研究鱼类组蛋白基因是否存在核苷酸的多态性以及组蛋白核苷酸多态性是否会影响鱼类的抗病力,本实验以斑马鱼和草鱼为研究对象,通过PCR扩增克隆了组蛋白H2A的全长开放阅读框;利用过表达技术、菌落平板计数、感染存活分析以及荧光定量PCR技术,研究了斑马鱼和草鱼组蛋白H2A核苷酸多态性不同变异体在杀鱼爱德华氏菌感染中的作用。在本研究中,实验发现鱼类组蛋白H2A存在着丰富的核苷酸多态性。序列分析结果显示斑马鱼和草鱼组蛋白H2A核苷酸多态性的变异体核苷酸序列相似性为90%～100%;而两两H2A核苷酸多态性变异体氨基酸序列之间最多只有3个位点存在差异。通过体内和体外抗菌实验可知,斑马鱼和草鱼组蛋白H2A核苷酸的多态性显著影响H2A的抗菌活性。此外,筛选出的抗菌组蛋白H2A核苷酸多态性的变异体在斑马鱼体内的过表达,不仅具有免疫增强的作用,还能显著增强斑马鱼对杀鱼爱德华氏菌感染的抗病力。本研究为筛选具有抗病作用的组蛋白H2A免疫保护原奠定了重要基础。     

Three SNPs within exons of INHA and ACVR2B genes are significantly associated with litter size in Dazu black goats

The aim of this study was to analyse the association between single-nucleotide polymorphisms within INHA and ACVR2B and litter size in Dazu black goats. In total, twenty-two SNPs were genotyped in 190 individuals by SNaPshot and resequencing. The results showed that three SNPs (SNP_1, SNP_12 and SNP_13 in this study) were detected to have significant additive genetic effect on the recorded goat litter size (p < .05). The SNP_1 (NC_030809.1), a non-synonymous substitution of G for T at chr2-g. 28314990 in the exon 2 of INHA gene (NM_001285606.1), resulted in homozygote 2 (HOM2) contributed 0.25 and heterozygote (HET) contributed 0.12 larger litter than homozygote 1 (HOM1). Meanwhile, SNP_12 (Chr22-g. 11721225 A > T) and SNP_13 (Chr22-g. 11721227 A > C) (NC_030829.1) simultaneously mutated at the first and third position of a triplet AAA (lysine, K) in the exon 4 of ACVR2B gene (XM_018066623.1) had estimated genetic effects of HOM1 (0.00) and HOM2 (0.03) larger than HET (−0.12). In conclusion, one SNPs (chr2-g. 28314990 T > G) within the exon 2 of INHA and two SNPs (Chr22-g. 11721225 A > T and Chr22-g. 11721227 A > C) i n the exon 4 of ACVR2B gene were highly recommended as candidate markers of litter size in Dazu black goats. A large-scale association study to assess the impact of these variants on litter size is still necessary.     

大型薄壳制件真空辅助树脂传递模塑工艺充模方案仿真分析及优化

针对大型树脂基复合材料制件不适于用实验试错法进行充模方案设计的问题,在分析树脂流动规律的基础上将大型薄壳件的求解区域分解,仿真分析了不同充模方案下树脂在纤维中的流动行为和模腔内压力变化,提出在制件填充面积等分处设置流道的方法,选择和优化大型薄壳制件的充模方案。结果表明:①对于不便进行实验试错法进行真空辅助树脂传递模塑(VARTM)工艺充模方案设计的大型薄壳制件,可以采用数值模拟的方式,以达西定律、能量守恒定律等为计算依据,求解压力场和速度场,对比不同仿真方案的充模时间等数据合理安排注胶方式方法,指导VARTM工艺制备大型复合材料制件合理安排注胶方式,提高生产率、减少因树脂浸润不均匀产生的缺陷。②对于大型薄壳类制件,忽略厚度方向尺寸,影响充模时间的主要因素为流道长度和树脂流动距离。选取尽可能长的注胶流道,合理设置流道位置以减少树脂流动的距离;长流道可以增加树脂瞬时注入量、提高较长时间的压力差;而树脂流程越长,树脂前锋处压力损失越大,流速越慢。③试验提出了制件填充面积等分处设置流道的方法。将大型薄壳工艺制件充模面积等分,注胶流道布置在垂直于制件长度方向的面积等分线上,可缩短充模时间并减少制件两端的树脂富集现象。对于较狭长部分可再次进行面积等分设置流道,以免造成树脂流程过长压力流失过多;而对于较宽阔部分不宜设置过多流道以免树脂前锋稳定前互相接触造成制件充模不均匀。